Ruger Mark IV Bolt Assembly 1 2 3 4 MK I II III MKI MKII MKIII MKIV 22LR 22 Part

Description: Ruger Mark IV Bolt Assembly 1 2 3 4 MK I II III MKI MKII MKIII MKIV 22LR 22 Part. Shipped with USPS First Class. These were pulled out of new pistols. This is a Ruger Mark IV complete pistol bolt assembly. It was removed from a new Ruger MK 4 pistol. It includes the firing pin, extractor, and recoil-spring assembly (all the parts as if it were removed from the pistol during field-stripping). The photo is of one of the bolts we are selling; the bolt you will receive will be similar to the one shown in the photos. The bolt is complete, ready for use in a Ruger MK 1, 2, 3 or 4 -- but PLEASE READ the IMPORTANT details below if you are planning to use this bolt in a Ruger MK 1, 2, or 3. Mark IV bolts can be used in Ruger's Mark I, Mark II and Mark III pistols, including the 22/45 versions, but fitting/gunsmithing work may be required, and certain functions -- like the bolt-hold open, or safeties -- may not work if combined with receivers and parts other than those made for Ruger Mark 4 pistols. Please read the following carefully: If a Ruger MK 4 bolt is used in a stock Ruger MK 1, the safety, when engaged, will not lock the bolt in the closed or hold-open position. The safety can be engaged (blocking the trigger) while the bolt is cycled to chamber a round. If a Ruger MK 4 bolt is used in a stock Ruger MK 2, the pistol will function the same as it did with its Ruger MK 2 bolt. If a Ruger MK 4 bolt is used in a stock Ruger MK 3, the bolt will not fit, and the pistol will not function unless the loaded-chamber indicator is removed from the pistol first; once the loaded-chamber indicator is removed, the pistol will function the same as it did with its MK 3 bolt. This Ruger MK 4 bolt would be a direct replacement ("drop in" part) in a stock Ruger MK 4 pistol. This Mark IV bolt would be a "drop in" fit for a Tactical Solutions PAC-LITE IV upgrade barrel/receiver since the PAC-LITE IV is designed to use Ruger Mark IV or Mark IV 22/45 parts. This Mark IV bolt may not be a drop-in part for earlier versions of a Tactical Solutions PAC-LITE barreled-receiver; you would need to consult with a gunsmith if you were planning to use this Mark IV bolt in an earlier version than a PAC-LITE IV. Firearm bolts should be installed by a qualified gunsmith or persons with similar technical/mechanical skills. Please check with your gunsmith about any intended uses you may have for this pistol part.

Price: 41.24 USD

Location: Citronelle, Alabama

End Time: 2023-10-08T01:53:35.000Z

Shipping Cost: N/A USD