Nintendo GameCube Xeno Mod Optical Laser DVD Drive w/ Swiss & SD Gecko Adapter

Description: Includes:GameCube Optical DVD Drive with Xeno chip installed.SD to Memory card Gecko adapter. Swiss disc with latest version on expensive vintage 2005 media and not limited to (Ritek, Memorex, Philips, Fujifilm; all vintage 2005 media), complete with custom case front cover and frosted plastic case.4.5mm gamebit screwdriver bit to open case. Full Product Details: This is for a Nintendo GameCube Optical Laser DVD Drive with a Xeno chip installed.Comes with an SD2SP2 adapter, with a 3D printed Serial Port 2 cover. The latest Swiss version on ludicrously expensive vintage 2005 media. Disc will come with a custom front case cover artwork as a free gift and a frosted case. The laser's potentiometer has been adjusted to a good range, and was not under adjusted to keep the integrity of the laser. All lasers are bench marked to ensure reliability.The laser has been adjusted and tested to ensure you can run Swiss. In the Swiss settings, make sure to "Stop DVD Motor on startup" to prevent wear and tear on the laser.If you are installing this in a GameCube that has a JPN menu, you must let me know; the copy of Swiss must be made to the region of your GameCube. If your menu is in English, no need to worry. This does not include an SD card or any games.Misc Notes:Includes a 4.5mm Gamebit security bit to open up your GameCube, you still need a screwdriver handle to insert this bit into, do not use power tools. Check out this tutorial up to step 10 on how to disassemble your GameCube:https://www.ifixit.com/Guide/Nintendo+GameCube+Optical+Laser+Lens+Replacement/1482When you put back the top of the case, YOU MUST keep the disc tray open or else you WILL destroy the legs of the door lid sensor that is attached to the DVD drive. This part is not repairable if those legs are destroyed and is very expensive, about $15 just for that part alone.When putting back screws DO NOT re-thread the screws! What this means is that if the screw does not easily go in, you must remove it and try again. You can snap the legs inside the GameCube case if you re-thread the screws. Hint! Go counterclockwise when screwing in screws until you feel a slight CLICK. Once you feel that click, screw clockwise, the screw should be in position.This will work on DOL-001, DOL-101, JPN, PAL, and USA models.Xeno chip will be covered with Kapton tape as an insulator for the chip.If your GameCube has a Serial Port 2, I have a SD2SP2 variant located here:https://www.ebay.com/itm/165251155179 Shipping: Location Service 1st Item Additional USAUSPS Ground Advantage FreeFreeUSAUSPS Priority $7FreeUSAUSPS Express $25Free Insurance:Insurance is included on all purchases, protecting against loss or damage during transit. If you would like signature confirmation, it is an additional $2.65. If your package is stolen once delivered, USPS nor myself are responsible. If the order has a total cost (including shipping costs and any taxes) of $750 or more, the seller is required to purchase signature confirmation. Please contact me prior to your purchase if you are interested in this service. Return Policy:All items are guaranteed against D.O.A. (dead/defective on arrival). If by chance your item is non-functional upon arriving, or not as described in the ad, a refund will be given up to 30 days of ad closing. Refunds will only be granted based upon this criteria. Buyer must pay for return shipment, and actual shipping costs will be deducted from the refund as well. Item must be returned in original condition complete with all material. International Buyers:Please note that customs duties and taxes are solely the responsibility of the buyer. In addition, the time frame in which an international package takes to arrive might fluctuate based on it's clearance through customs. The USPS, eBay, or myself have no control over this aspect and will not be held responsible. For any further inquiries, feel more than free to contact me 24/7!!!Thanks for looking & have a great day!!

Price: 84.95 USD

Location: Central Islip, New York

End Time: 2023-11-12T06:16:21.000Z

Shipping Cost: 0 USD