NBA Jam Tournament Edition ARCADE PCB set working 100% Revison 4

Description: Bally Midway NBA Jam Tournament Edition ARCADE PCB set working 100% REVISION 4 This Listing is for the Board set, ribbon cable, manual, and new battery only This board was purchased from Aladdin's Castle in the early 90s and has only been powered up for testing since then. It is in excellent condition. Please refer to the pictures to see the condition. This has been tested and is working 100%; due to the fragile nature of a nearly 30-year-old arcade PCB, we will not be responsible for any damage incurred when plugging this in. Even though this board is working and has been tested on our test fixture, we are selling it as used, secondhand, and 'untested,' with no returns accepted. Note: Revision 5 is available but was never released publically; below is a link to the ROM set. If you have an Eprom programmer, you can download the files to convert this board to Revision 5.https://www.arcade-projects.com/threads/nba-jam-tournament-edition-se-5-0-released.28249/ This is a JAMMA board, which requires an additional power cable to the soundboard that is not included. To vary the sound level, a volume potentiometer with a 2-wire cable and Molex connector must also be attached to the soundboard. We use a 9k ohm resistor in a Molex connector to hear the audio during testing. We provide a battery to replace the original in this listing; remove the old battery from the socket and replace it with the new one. If you are buying an arcade PCB, then we assume you know how to connect it.

Price: 350 USD

Location: Mishawaka, Indiana

End Time: 2024-11-25T19:36:09.000Z

Shipping Cost: 25 USD