Hybrid Racing Universal K-Swap Conversion Harness

Description: DESCRIPTION: With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world! The K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap. Who should purchase the Universal Harness? The Hybrid Racing Universal K-Series Swap Conversion Wiring Harness is designed for those people who have decided to install a K-Series engine into a non-honda chassis or a chassis where a standard plug and play conversion harness is not available. (such as Preludes, DA Integras, Accords, and older Honda chassis) This harness has also been used in custom open wheel cars such as the Ariel Atom, RCR Superlite Roadster, Sandrails, and 3 wheeled Trikes. It has also been used on Mini Coopers, Toyota MR-2s, Lotus Elises as well as full blown tubed frame race cars. If your engine of choice is the K-Series motor and plan to use the OEM K-Series ECU than we can help you get it started. What is included with the race harness? The race harness includes a fuel pump relay, a main relay and a primary oxygen sensor relay. The harness comes wired with the provisions for the OEM K-Series 02-04 Wideband o2 sensor and an OBD2 port. This harness has outputs including, tachometer, speedometer, low oil pressure warning, malfunction indicator, fan control, fuel pump control and for the starter relay. You will need to supply the harness with a constant 12v and switch 12v source. With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world! The K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap. What engine harness does the Hybrid Racing conversion harness work with? This harness works with all USDM / JDM 02-04 wiring harnesses including, K20A, K20A2, K20A3. This harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor. This harness does NOT work with any 05-06 OR K24 engine wiring harnesses. What type of connectors and pins do you use? When we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free. FEATURES: Plug and play K-Swap conversion harness! Brand new connectors and pins sourced from the same company Honda uses. Powering 1000's of K-Swaps world wide! Hybrid Racing Universal K-Swap Conversion Harness DESCRIPTIONDESCRIPTION: With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world! The K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap. Who should purchase the Universal Harness? The Hybrid Racing Universal K-Series Swap Conversion Wiring Harness is designed for those people who have decided to install a K-Series engine into a non-honda chassis or a chassis where a standard plug and play conversion harness is not available. (such as Preludes, DA Integras, Accords, and older Honda chassis) This harness has also been used in custom open wheel cars such as the Ariel Atom, RCR Superlite Roadster, Sandrails, and 3 wheeled Trikes. It has also been used on Mini Coopers, Toyota MR-2s, Lotus Elises as well as full blown tubed frame race cars. If your engine of choice is the K-Series motor and plan to use the OEM K-Series ECU than we can help you get it started. What is included with the race harness? The race harness includes a fuel pump relay, a main relay and a primary oxygen sensor relay. The harness comes wired with the provisions for the OEM K-Series 02-04 Wideband o2 sensor and an OBD2 port. This harness has outputs including, tachometer, speedometer, low oil pressure warning, malfunction indicator, fan control, fuel pump control and for the starter relay. You will need to supply the harness with a constant 12v and switch 12v source. With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world! The K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap. What engine harness does the Hybrid Racing conversion harness work with? This harness works with all USDM / JDM 02-04 wiring harnesses including, K20A, K20A2, K20A3. This harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor. This harness does NOT work with any 05-06 OR K24 engine wiring harnesses. What type of connectors and pins do you use? When we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free. FEATURES: Plug and play K-Swap conversion harness! Brand new connectors and pins sourced from the same company Honda uses. Powering 1000's of K-Swaps world wide! PAYMENTSHIPPINGRETURNSABOUT USPAYMENT PAYMENTSHIPPINGRETURNSABOUT USPAYMENT Payment is accepted via Paypal or Credit/Debit card to be paid immediately upon purchase. If you have any queries please dont hesitate to contact us!PAYMENTSHIPPINGRETURNSABOUT US SHIPPING PAYMENTSHIPPINGRETURNSABOUT US SHIPPING We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page. Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its product page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.If a tracked shipping service (e.g. DPD) is requested to be delivered to a location which cannot be signed for we cannot be held responsible or liable for goods going missing.PAYMENTSHIPPINGRETURNSABOUT US RETURNS PAYMENTSHIPPINGRETURNSABOUT US RETURNS You may return most new, unopened items within 30 days of delivery for a full refund.You should expect to receive your refund as soon as we receive the parcel from the return courier.This time period includes the transit time for us to receive your return from the shipper, the time it takes us to process your return once we receive it, and the time it takes your bank or paypal to process our refund request.If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.PAYMENTSHIPPINGRETURNSABOUT US ABOUT USPAYMENTSHIPPINGRETURNSABOUT US ABOUT USWelcome to Exoracing, specialists in Japanese performance and modification parts. Exoracing was formed in mid-2018 to create a trustworthy brand and a company that can deliver high-quality parts at fair and affordable prices. We aim to cater to all automotive build levels, turning daily drivers into show cars to high-performance race applications. No build is too big or small for Exoracing to be involved. Quality is a high priority here at Exoracing and has been since day one. We only source our products and materials from the best suppliers, also doing everything possible to keep our loyal customers' costs as low as possible. From our products to other brands we supply, we aim only to hold stock of products we would use ourselves! We stock a massive range of brands such as Haltech, Hel performance, SuperPro, Competition Clutch, Soft99 and many more to give you a wide range of options. Thousands of products are stocked in our UK warehouse to ship out the same day. We have manufactured our own range of products, such as our well-known heat management range renowned for high-performance turbocharged vehicles. We have an extensive range of gaskets and silicone hose kits to keep your car performing the best it possibly can. Finally, no car is complete without the personal touch of styling; our massive range of dress-up products adds flair to every corner of your vehicle. We never stop working hard to improve the business and website in any way we can. From adding usability features on the website, such as "Shop by car", to searching for the best suppliers. We aim to provide a friendly yet professional service you can trust and rely on. Our excellent customer service staff are always available and will strive to answer any queries you have.CHECK OUT SOME OF OUR OTHER PRODUCTS & BRANDS WE HAVE LISTED ACROSS EBAYSHOP NOWSkunk2 Rear Camber Arms For Honda Civic Integra Ef Eg Ek Crx 88-00£209.02SHOP NOW1 X Exoracing Blue Polyurethane Exhaust Hanger Mount Long£8.79SHOP NOWSkunk2 Clear Rear Lower Control Arms Ultra Series For Honda Civic Integra Ef Eg £385.88SHOP NOWSkunk2 Gold Rear Lower Control Arms For Honda Civic Ep3 01-05£279.02SHOP NOWSkunk2 Front Camber Arms Pro Series Plus For Honda Civic Ek 96-00£327.10SHOP NOWSuperpro Rear Camber Adjustment For Honda Accord Mk7, Euro Cl Cn 03-08£369.36SHOP NOWSkunk2 Rear Lower Control Arms Black Series For Honda Civic Ep3 01-05£279.02SHOP NOWSkunk2 Rear Camber Arms For Honda Civic Integra Ep3 Dc5 01-06£209.02STOREFEEDBACKCONTACT USADD TO FAVOURITES

Price: 264 GBP

Location: Honiton

End Time: 2024-05-14T20:04:28.000Z

Shipping Cost: 57.48 GBP