Hejnar conversion 4 Manfrotto 410 arca kirk markins wimberley acratech rrs

Description: Part Number # M410Long with F63 clampProduct Description:New Hejnar Photo conversion set for Manfrotto 410 gear head. This combination of plate and clamp will let you use Manfrotto geared head with any arca swiss equipment. Manfrotto gear head is more precise than ball head and preferred by many photographers. Many architectural and interior photographers actually prefer geared 3-axis tripod heads rather than ball heads because they can make precision adjustments to each axis. Two popular heads are Manfrotto 405 and 410 which each use Manfrotto QR plate. Arca-swiss plate fans can now bypass this. Clamp can disconnected from plate and use independent on other equipment if needed. Clamp can be positioned in relation to adapter plate in 90 degree increments to make it convenient for everybody. Clamp can be mounted to adapter plate either with two or three screws and will depends on clamp orientation This is extended version of the plate. Clamp center is located on Manfrotto 410 camera/lens mount axis and it is the same as the head panning base. In other words, if you look down through the 3/8 mount hole on the 410 it is the exact center of the bottom panning control. When the head is panned both the head and camera/lens rotate around the same axis. For distant subjects original Manfrotto arrangement for this gear head is just an inconvenience. But for critical panoramic or most especially macro work this is a killer and makes the 410 useless. Using this adapter plate/clamp combination you can enjoy your pano and macro photography again. Adapter plate is attached to Manfrotto geared head in two simple steps.1) removing lock down level with provided 3mm hex key.2) Connect plate to geared head using one 1/4-20 screw and one 10-32 screw. Compatible with:Markins Really Right Stuff, iWimberleyKirkPhoto ClamFoba Custom BracketsJobu DesignsAcratechOther Arca swiss type products Clamp Specification:3.25 inch longSocket is countersunk on top for 1/4-20 screw but also threaded 3⁄8”-16.Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other.Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed and your plate has safety stopsClamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside.Precision C.N.C. machined from 6061-T6 AluminiumCompatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.Stainless steel hardware.Black hard coat anodized clamp and clear anodized knob.Made in USAPlate Specification 4.550 inch long.2.560 inch wide.0.625 inch thick.Weight 3.6 oz (180g)Auction Includes:One adapter plate.One 3.25 inch clamp ( Model F63)Two 1/4-20 x 3/4 screws.Three 10-32 screwsHex key for ¼-20 screw 10-32 screw and original level screw Shipping Information:Free Shipping with USPS First Class Mail. Tracking information provided. USA Costumers please note that USPS packages may travel much longer than the estimated delivery time and tracking information is not always updated daily. If your order is time sensitive, you need daily tracking update please use FedEx, UPS or Express Mail as delivery service during checkout.

Price: 135 USD

Location: Bloomingdale, Illinois

End Time: 2024-02-10T00:53:08.000Z

Shipping Cost: 0 USD