Description: GENUINE NGK Spark Plug Resistor Cover"NOT A KNOCKOFF"LB05F NGK stock # 8051 (black)NGK Spark Plug Resistor Cover (LB05F). You will receive 1 resistor coverYou must remove the little cap on the end of your spark plug before you can attach it. NO MORE WHITE LETTERING ON THE PLUG CAPS 90 degree, Elbow Type, 5k ohm resistance, color: black, suitable plug thread:14mm. Designed to reduce electro magnetic interference and radio frequency interference, which can interfere with electronic ignition components, causing misfires and poor engine performance. Highly durable phenolic resin and EPDM rubber.Ceramic resistors ensure optimum performance and reliability.Built to withstand extreme heat and vibration.Prevents flashover.Ensures optimal service life and performance.NGK spark plug resistor cover.You must remove the little cap on the end of your spark plug before you can attach it.LB05Fstock # 8050 (black)41mm x 2mm NGK Spark Plug Resistor Cover - LB05F for the CB350 twin and most of Honda's other twin's from the 60's and 70's. This one has a 90 degree bend. For 14mm thread spark plugs without the terminal nut. Rubber waterproof boots to seal out the elements. We recommend using non-resistor type spark plugs when using resistor caps.NGK spark plug resistor covers are the best protection against radio frequency interferenceRubber waterproof boots to seal out the elements, so the engine won't cut out if it rains.For use with 7mm diameter plug wiresFits all Honda Twins from the 60's and 70's plus a lot of single cylinder 4 strokes and 2 strokesNGK Spark Plug Resistor Cover - LB05F for the CB350 twin and most of Honda's other twin's from the 60's and 70's. This one has a 90 degree bend. For 14mm thread spark plugs without the terminal nut. Rubber waterproof boots to seal out the elements. We recommend using non-resistor type spark plugs when using resistor caps on vintage Honda's.NGK spark plug resistor covers are the best protection against radio frequency interferenceRubber waterproof boots to seal out the elements, so the engine won't cut out if it rains.For use with 7mm diameter plug wiresFits all Honda Twins from the 60's and 70's plus a lot of single cylinder 4 strokes and 2 strokesSold IndividuallyNGK Part Number: 8030Replaces Honda Part Number: 30700-098-153Installation tips:Remove terminal nut before installing new spark plugs. It's screwed onto the top of the spark plug.Put a light coating of anti-seize on the spark plug threading before installing. After all, you're threading a steel part into a aluminum engine case.Don't over tighten the spark plug, 1/8 to 1/4 turn past finger tight.When using the old spark plug wires, trim them back 1/4" - 1/2" to expose fresh wire, then using a pick type tool, fan out the wires before threading on the new resistor cover.Twist on the new cover about 3 full turns and give it a tug to make sure it's snug.Also fits tons of other bikes. Check the part number and photo to see if it's what you need.
Price: 8.95 USD
Location: Schenectady, New York
End Time: 2024-08-28T15:57:17.000Z
Shipping Cost: 4.95 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: NGK
Manufacturer Part Number: LB05F
Country/Region of Manufacture: Japan
