Description: 🎁【GAS TYPE & PRESSURE】Gas Type: Natural Gas(NG), Inlet gas pressure: 1/2 PSI, Outlet pressure: 11"(2.74kPa) Water Column. Liquid Propane(LP), Inlet gas pressure: 1.74 kPa, Outlet pressure: 5" Water Column. 🎁【PIPE THREAD SIZE】 1/2" Inlet & 1/2" Outlet NPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture's table. 🎁【CAUTION】 This regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. 🎁【MARKING】 Model: RTZ-ED, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column. Gasland chef gas pressure regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. Do not install the regulator too close to the heating equipment or use in very cold environment. PRODUCT DESCRIPTION Brand: Gasland chef Gas type: Natural Gas (NG) Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar) Outlet pressure range: 3” - 6” Water Column Ambient operating temperature range: 32°F - 225°F (0°C - 107°C) Refer to the pictures on how to find the correct pipe thread size. This regulator has 1/2" openings for 1/2" gas pipes. 1/2" IN and 1/2" OUT Female Pipe Thread. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. ATTENTION NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS The pipe fittings for this regulator are based on NPT pipe threads - dimensions according ANSI/ASME B1.20.1 standards Install the regulator properly with gas flowing as indicated by the arrow on the casting *NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator KINDLY NOTE WARNING: The NPT thread size is NOT referring to the size of the thread itself! The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe Measuring the pipe will often mislead you into choosing the wrong pipe size The "pipe thread size" is measured and based on the inside of the pipe A lot of people measured the thread / the opening for the thread/outside diameter！ THE MOST PROFESSIONAL GAS PRESSURE REGULATOR MANUFACTURER Wide Compatiblity Excellent Quality 1/2 Inch Inlet Gas Pressure
Price: 25.99 USD
Location: North Charleston, South Carolina
End Time: 2024-09-18T00:06:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: GASLAND
MPN: JK-ED1
Compatible Gases: Propane, Gas
Item Type: Gas Pressure Regulator
Country/Region of Manufacture: Unknown
Unit Quantity: 1
Unit Type: Unit
Inlet pressure: 1/2 PSI (34 mbar)
Outlet pressure range: 3” - 6” Water Column
Ambient operating temperature range: 32°F - 225°F (0°C - 107°C)
Suitable for: Liquefied Propane and Natural Gas
In/Out Gas Pipe: 1/2" NPT
Gas Inlet: 1/2 PSI(3.5 kPa)
Outlet Pressure: 5"-11" WC
Suit: Gas Cooktop, Firepit
