Calcium & Magnesium TDS Hardness Reduction Water Softening Cation Resin 6 Pack

Description: 1 set of replacement filters with following : 6 x Cation Resin Cartridge Filters Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems.Filter Media: Cation Resin Capacity : 750 grains Maximum Recommended Flow Rate: 2.5 to 5 GPM (depends on incoming water pressure). Operational Temperature Range: 40°F to 100°F Maximum pressure: 125 PSI (8.6 bar) Minimum pressure: 20 PSI (1.4 bar) 5-Micron nominal rating. Cartridge capacity dimensions - ID: 30mm OD: 70mm Reduces Total Dissolved Solids (TDS) and hardness, can also be used as a pre-filter to prevent build-up of scale on sensitive equipment. End Caps: Polypropylene Inner/Outer Wraps: Polyolefin Netting: Polyethylene All filters are individually wrapped. Detailed Description For water hardness reduction, our Cation Resin Filter softens your water by releasing Hydrogen (H+) ions or other positively charged ions in exchange for impurities present in the water. The process involves passing water containing hardness mineral ions, namely calcium (Ca2+) and magnesium (Mg2+) through a column containing a strongly cation exchange resin in the sodium (Na+) form (i.e. the exchangeable cations are sodium). The calcium and magnesium ions are exchanged for an equivalent number of sodium ions. The resin, once exhausted, (i.e. all the available sodium ions have been exchanged) must be re-charged. This entails passing a solution containing a high concentration of sodium salts, such as brine (sodium chloride), through the ion exchange resin in a process known as regeneration. Total 6 filters, each individually wrapped. --> -->

Price: 135 USD

Location: Concord, Ontario

End Time: 2025-01-19T20:14:09.000Z

Shipping Cost: 0 USD