Description: ZADI PUSH LOCK in BLACKNote photos show white to confirm you will receive the lock in black Please see my shop category motorhome parts for other locks and latches Compact flush design, the door handle pops out Internal compression locking catch Waterproof and corrosion protected Complete with ZADI barrel and key set Complete with neoprene gasket Easy to fit with backing plate Fits doors up to 50mm thick Smooth operationIf you buy multiple locks we supply them keyed alike! DimensionsBarrel diameter: 3cmCatch plate length: 6cmHandle length: 8cmDistance between screw holes: 5.5cm This ZADI STS oval compartment lock is common to many mobile vehicles built in the U.K. such as the Swift Autotrail Bessacar elldis and European marks such as Hymer Mobile. The Zadi STS lock operates on a 90-degree twist action. It has a compression action that means the door latch turns then pulls the door tight closed (to ensure a snug fit against a door seal.)There is a backing plate included with the locking kit which is for optional use depending on the application of your lock. If the lock is being used on a thin metal sheet wall or similar, use the backing plate on the interior side of the wall to hold your screws in place. If the desired use of the lock is on a thick wood type material, the backing plate will not be necessary as the wall material will grasp the screws. To operate put the key into the barrel, turn the key and the external handle pops out towards you making it obvious the door is now unlocked. A 1/4 turn on the handle and the door catch is released. To lock the door latch it is simply a case of twisting the locking catch and pushing the handle back flush into the mounting.To replace your broken or sticking door you open your existing latch which reveals 2 external screws. Remove these. Undo the bolt on the rear of the Lock holding the catch on and remove the entire unit. To refit the new lock pass it through the door hole taking care to keep the supplied neoprene gasket in place. Using suitable screws (not supplied) secure the barrel in place, then fit the rear latch washer and finally the bolt and tighten. That’s it you're done! The barrel as configured here has a gap of 50mm between the face of the outer latch and the face of the locking catch. These locks are often fitted on doors with a thickness less than 50mm because the manufacturers pack out or bend the internal catch plate to fit the locks reach We are expanding sales from high end boat parts into the leisure market. We are experienced within the marine markets and were bringing this to our other passion. As avid travellers in our motorhome we try the products ourselves. If it's not of sufficient quality they don't make the shelves. SIMPLE !Always competitive on price our products last!! ANY QUESTION JUST ASK!!! Please visit our shop and browse through our quality items you will be surprised what useful items we have!
Price: 29.99 GBP
Location: Northampton
End Time: 2024-08-19T11:17:18.000Z
Shipping Cost: 18.18 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Return policy details: Items should be returned using the Ebay managed returns process. Return postage costs will be refunded if the item is faulty, damaged or not as described in the listing.
Door Thickness Compatibility: 5 cm
Installation Type: Screw-On
Manufacturer Part Number: 2007-H20SM3-840
Set Includes: Key, Lock, Mounting Hardware
Material: Plastic
Item Length: 7 cm
Suitable For: Compartment Door
Placement on Vehicle: Exterior
Colour: Black
Brand: STS ZADI
Type: Door Lock
Manufacturer Warranty: 1 Year
Item Height: 8 cm
Number in Pack: 1
Features: Lockable
Handle Type: Compression Lock
Opening Type: Keyed
Item Width: 4 cm
Item Weight: 0.2kg
