Description: A logic input can provide control of system actions like recalling presets, muting channels, ducking signals, combining rooms, etc by means of an external contact closure or 5V TTL logic.On the back panel of the Logic Box, there are 5 connector blocks, each with 4 logic pins and a ground pin labeled with a down pointing arrow. Also note that these pins are numbered above and below the connector. Logic pins that are being used as inputs are counted from left to right, so you will be looking at the numbers on top to reference the logic input.A logic output can be used to provide indication such as microphone activity or control external devices by using relays such as speaker level control.These logic outputs are “open collector” with an internal pull-up. This means that when not active, they will measure 5V but will not provide current. Upon activation (from a logic signal within the Audia/Nexia program), the logic output goes low, allowing current flow.Logic outputs are rated at 24V and 500mA of sinking capability. On the back panel of the Logic Box, you will notice 5 connector blocks, each with 4 logic pins and a ground pin labeled with a down pointing arrow. Also note that these pins are numbered above and below the connector. Logic pins that are being used as outputs are counted from right to left, so you will be looking at the numbers on the bottom to reference the logic output.
Price: 40 USD
Location: Rogers, Minnesota
End Time: 2025-01-19T19:06:50.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: biamp
Model: Logic Box
